Large diameter stainless steel pipe is sandblasted and shot blasted, sandblasted. Sand blasting is to use a compressed air stream to spray sand on the surface of the part to remove the scale, rust,...

Surface cleanliness generally refers to the degree of cleanliness of the desired surface after degreasing, descaling, descaling and other corrosion products, removal of old coatings, and even the...

In order to achieve satisfactory quality in the machining of large diameter stainless steel pipes, the turning tools must have suitable rake angles and back angles.

The physical properties of stainless steel include many contents such as density, melting point, thermal conductivity, electrical conductivity, thermal expansion, magnetic permeability and temperature...

The resin base of large-diameter stainless steel pipe should be fully cross-linked and cured. The completeness of cross-linking curing depends mainly on temperature and time.

Thick wall stainless steel pipe after surface treatment, such as sandblasting (pill), chemical cleaning, high pressure water cleaning scales, mechanical cleaning, etc., and coat lining coating or thin...

Especially in curing time has dropped below 230-240 ℃ / 3 min, not only makes the process simplified, large diameter stainless steel pipe coating at the same time embodies the hard, thin layer, high...

The corrosion condition of large diameter stainless steel pipe was detected by TEM method.Electrochemical corrosion, stray current corrosion and anaerobic bacteria corrosion, the result is quantity of...

Large diameter stainless steel thick wall pipe die casting process has been used to produce various types of stainless steel thick wall pipe die casting pieces.

Stainless steel thick wall pipe inside is direct contact with the medium , most of which mixed in a lot of corrosion medium gene, for example water of high salinity, dissolved oxygen, carbon dioxide,...