The resin base of large-diameter stainless steel pipe should be fully cross-linked and cured. The completeness of cross-linking curing depends mainly on temperature and time.

Thick wall stainless steel pipe after surface treatment, such as sandblasting (pill), chemical cleaning, high pressure water cleaning scales, mechanical cleaning, etc., and coat lining coating or thin...

Especially in curing time has dropped below 230-240 ℃ / 3 min, not only makes the process simplified, large diameter stainless steel pipe coating at the same time embodies the hard, thin layer, high...

The corrosion condition of large diameter stainless steel pipe was detected by TEM method.Electrochemical corrosion, stray current corrosion and anaerobic bacteria corrosion, the result is quantity of...

Large diameter stainless steel thick wall pipe die casting process has been used to produce various types of stainless steel thick wall pipe die casting pieces.

Stainless steel thick wall pipe inside is direct contact with the medium , most of which mixed in a lot of corrosion medium gene, for example water of high salinity, dissolved oxygen, carbon dioxide,...

C is an industrial chemical in the main chemical composition of a kind of stainless steel, stainless steel and performance of the organization in the most extent, depends on the carbon content in...

The semi-austenite deposition hardness is higher than that of stainless steel thick wall pipe and martensite precipitation hardening stainless steel through the combination of martensite...

Thick wall stainless steel pipe is one of a wide range of special steel series, it has to do with the stainless steel material is the same, we use is the premise of iron and carbon with iron - carbon...

In addition to liquefied petroleum gas storage and transportation equipment to use good toughness at low temperature, low toughness a brittle transition temperature of thick wall stainless steel tube,...